Aero
35.001IP54 low-glare form with a 675 lm output and a documented Casambi option.
Output675 lm
Power9 W
Body110 × 90 × 55 mm
3000 / 4000 / 5500 KIP54Casambi /BTC
View downlight range →Wireless-control downlight shortlist
Casambi downlights for wireless lighting control.
Compare four recessed families with a documented Casambi option. Start with the aperture, output and light direction; then confirm the control schedule against the project brief.
- Verified families
- 4 recessed ranges
- Output span
- 550–1275 lm
- Control evidence
- Casambi /BTC option
Specification answer
Choose the luminaire first, then coordinate its controls.
Casambi is available as a specified option on the families shown here. The right starting point is still the ceiling: cut-out, bezel, depth, ingress requirement, beam and useful light output.
Aero gives a larger IP54 form. AeroLux is a compact fixed option. Axis adds fixed or tilt geometry with the highest output in this shortlist, while Glow is the smallest-output accent choice.
Control scope
Confirm drivers, switching intent, grouping and commissioning responsibility in the project schedule.
Product scope
This is a verified shortlist, not a claim that every downlight in the catalogue carries the same option.
Interactive shortlist
Filter by the ceiling and the light task.
The selector uses only current datasheet facts. “All” keeps the full verified set visible.
4 source-verified families match this brief.
AeroLux
AEROLUXCompact 80 mm bezel with a 70 mm cut-out and 750–775 lm output.
Output750–775 lm
Power8 W
Cut-out70 mm
3000 / 4000 K74 mm heightCasambi /BTC
View downlight range →
Axis
AXISFixed or tilt geometry with a 67 mm cut-out and the widest output range in this set.
Output725–1275 lm
Power9.5–14 W
Beam36° standard
2700 / 3000 / 4000 K67 mm cut-outCasambi /BTC
Open Axis →
Glow
GLOWMiniature downlight for lower-output accent and small-aperture layouts.
Output550–775 lm
Power6–9.5 W
Beam40° standard
2700 / 3000 / 4000 K67 mm cut-outCasambi /BTC
Open Glow →Product comparison
Compare dimensions, output and control options.
Use the aperture, output and light direction to narrow the family before confirming the Casambi option.
| Family | Ceiling detail | Output | Direction | Casambi option |
|---|---|---|---|---|
| Aero | 110 × 90 × 55 mm body | 675 lm | Fixed | /BTC option |
| AeroLux | 70 mm cut-out | 750–775 lm | Fixed | /BTC option |
| Axis | 67 mm cut-out | 725–1275 lm | Fixed or tilt | /BTC option |
| Glow | 67 mm cut-out | 550–775 lm | Fixed | /BTC option |
Control brief
What to resolve before quotation.
A short, coordinated brief prevents a wireless-control label from standing in for the full system decision.
Ceiling and luminaire
Record cut-outs, recess depth, IP needs, aiming and any existing holes that constrain the choice.
Zones and behaviour
Define which luminaires group together and what scenes or switching behaviour the project needs.
Delivery responsibility
Identify who supplies, addresses, commissions and hands over the controls.
Frequently asked questions
Casambi downlight questions.
Answers stay within the published options in the compared product schedules; project combinations still require confirmation.
Are all Lumenloop downlights Casambi compatible?
No. This page shows four families with a documented Casambi option. Other families need checking against their current schedules.
Can Casambi be added after the downlight is selected?
Do not assume so. Coordinate the option, driver arrangement and controls brief before ordering.
Which is the smallest cut-out here?
Axis and Glow use a 67 mm cut-out in the inspected data; AeroLux uses 70 mm.
What project information is needed before selection?
Confirm the ceiling aperture, required output, colour temperature, control zones and driver arrangement before ordering.
Project support
Send the ceiling plan and control intent.
We can check the current luminaire options against aperture, output, CCT, zones and programme.