Luma · UK-made linear lighting
Low-glare LED lighting above your desk. A slim surface or suspended fitting, with colour and dimming options for your home workspace.
Luma · home office visualisation
A fitting for a dedicated workspace
A slim linear luminaire, with recessed optical cells and a choice of ceiling or suspended installation.
For a permanent home office desk or a separate study, Luma puts a controlled line of light above the working area. Its matt black dark-light baffles and office lens make it a practical choice to consider for screen-based work, without adding a table lamp to the desk.
Choose the body length, output and finish to suit the room, then specify the driver and mounting arrangement. Luma is built to order, so the quotation should cover the complete fitting and the accessories your installation needs.
The installation
The same Luma family offers two mounting approaches. Decide how the fitting will sit in the room before choosing the suspension accessories and final specification.
Surface mounting is the standard arrangement. The luminaire fixes at the ceiling rather than hanging on wires, keeping the body close to the mounting plane. It is an option to consider where you want a ceiling-mounted light without a pendant drop.
Suspension lets Luma sit lower in the room, parallel to the desk. This arrangement needs a separate suspension kit. Confirm the drop and the relationship to the desktop, monitor and seated sightline rather than choosing a hanging height from the image alone.
Length and light output
Both Luma lengths offer lower, standard and higher-output variants. A longer body is not simply a substitute for more light, and the highest output is not automatically the right choice for a small study.
Use desk width, room dimensions, ceiling height, natural daylight and mounting position together when comparing options. The lumen figures below describe the fitting’s output; they do not state the illumination reaching a particular desk.
| Body length | Available output | System power | Colour temperature |
|---|---|---|---|
| 1,271 mm | 1,850–3,750 lm | 14–27 W | 3000K or 4000K |
| 1,550 mm | 2,300–4,675 lm | 17–33 W | 3000K or 4000K |
The exact output and power depend on the selected model. Send the room dimensions and a desk layout with your enquiry so the fitting can be discussed in context. Final quantities, spacing and light levels need a lighting calculation.
The optics
The LED optical cells sit within the baffles, rather than behind an exposed continuous diffuser.
Luma’s standard matt black baffles and 50° office lens provide its low-glare optical design. An 80° wide-beam lens and white soft-light baffles are available options. Discuss the distribution and appearance you need before adding them to the specification.
Monitor position and the viewing direction still matter. A low-glare luminaire does not by itself establish a glare-free installation: fitting position, room surfaces and the relationship to the screen must be considered together.
Check the datasheet and photometric files ↗
Colour and control
Colour temperature and dimming are separate choices. Include the existing switch or control system in your enquiry so the driver, wiring and user control can be checked before ordering.
The warmer white option to consider when you want the workspace lighting to sit alongside warmer lighting elsewhere in the home.
The cooler white option to consider when that appearance better suits the study and the other lighting in the room.
These are separate model choices. Standard 3000K and 4000K fittings do not change between the two colour temperatures after installation.
Specify the standard non-dimmable control gear for fixed-output operation. This is the straightforward choice where an ordinary switch is all you need.
Confirm the electrical supply and switching arrangement with the installer.
SwitchDIM, DALI and DSI options use the appropriate control gear. They are different control arrangements, so the chosen driver must suit the intended switch, controller and wiring.
Send the make and model of an existing wall dimmer. A dimmable fitting is not automatically compatible with it.
A Bluetooth control option, including dimming, is available. Specify this when you want that control approach, and confirm the complete arrangement for operating the light.
Confirm the control interface and any commissioning requirements with the quotation.
RAL 9006 grey is the standard body finish, with RAL 9016 white and RAL 9005 black options. The body finish and baffle choice are separate specification decisions.
Your quotation
Luma pricing depends on the selected length and output, body finish, control gear and mounting accessories. Suspended installations need the separate suspension kit included in the quotation. Give us the quantity and required date alongside the room details.
Ask for the quotation to identify the fitting, driver and accessories together. If you are still choosing between fixed output and dimming, include that in the brief so the alternatives can be discussed before you order.
Use the current Luma datasheet and installation information when planning the work. Fixing suitability, electrical supply, wiring and control compatibility need to be checked by the installer against the final specification.
| Model | Length | Output | CCT | Power |
|---|---|---|---|---|
| LUMA.001/LO | 1,271 mm | 1,850 lm | 3000K | 14 W |
| LUMA.001 | 1,271 mm | 2,725 lm | 3000K | 20 W |
| LUMA.001/HO | 1,271 mm | 3,575 lm | 3000K | 27 W |
| LUMA.002/LO | 1,271 mm | 1,925 lm | 4000K | 14 W |
| LUMA.002 | 1,271 mm | 2,850 lm | 4000K | 20 W |
| LUMA.002/HO | 1,271 mm | 3,750 lm | 4000K | 27 W |
| LUMA.003/LO | 1,550 mm | 2,300 lm | 3000K | 17 W |
| LUMA.003 | 1,550 mm | 3,425 lm | 3000K | 25 W |
| LUMA.003/HO | 1,550 mm | 4,475 lm | 3000K | 33 W |
| LUMA.004/LO | 1,550 mm | 2,400 lm | 4000K | 17 W |
| LUMA.004 | 1,550 mm | 3,575 lm | 4000K | 25 W |
| LUMA.004/HO | 1,550 mm | 4,675 lm | 4000K | 33 W |
Before you order
Your home office project
Tell us about the room, the desk and how you want to use the light. We can discuss the Luma specification and quote the fitting, control gear and mounting accessories together.
Prefer to talk through the specification? 02045 721 554
You do not need a product code to enquire.
